Upcoming Events
9:00 am CAROL NASH CLASSIC BIKE GUIDE WI... @ Newark Showground
Jan 5 @ 9:00 am – Jan 6 @ 5:00 pm
A kick-start to the new classic motorcycling year, the Carole Nash Classic Bike Guide Winter Classic takes place on January 5-6 at Newark Showground. It offers a welcome respite from the hectic holiday season and[...]
9:00 am 39th CAROL NASH BRISTOL CLASSIC ... @ The Royal Bath & West Showground
39th CAROL NASH BRISTOL CLASSIC ... @ The Royal Bath & West Showground
Feb 2 @ 9:00 am – Feb 3 @ 5:00 pm
What’s on From humble beginnings in 1980, the show has grown and evolved into Britain’s greatest annual celebration of all that is best about the motorcycles of yesteryear. The event is a magnet for enthusiasts,[...]
9:00 am Cogenhoe Swap Meet 2019 @ Cogenhoe Village Hall
Cogenhoe Swap Meet 2019 @ Cogenhoe Village Hall
Feb 24 @ 9:00 am – 1:00 pm
Cogenhoe Swap Meet 2019 @ Cogenhoe Village Hall
MEMBERS ONLY FREE EVENT Come along to the Cogenhoe Village Hall for the superb Swap Meet. Free Tables available for you to sell your spare triple parts and there will be lots available for purchase.[...]

Pilot jets

Home Forums TR3OC Members Forum Pilot jets

This topic contains 5 replies, has 3 voices, and was last updated by David Lord David Lord 4 months, 3 weeks ago.

  • Author
  • #7276

    John Allaway

    The carbs on my T160 have brass pilot jets screwed in to the bodies. Is this normal?  The carbs are numbered A626 L77, A626 R76 and A626 R76.


    It is a 1975 T160, engine number EK04280


    There’s no reference to detachable pilot jets in the parts book or manual and the last one I saw was a long time ago on a Ducati single. Hence wondering!

  • #7282

    Angus McLeod

    Are the pilot jets screwed into the body so that they protrude into the float bowls?

    I believe they are like that on two strokes. It is not normal for a triple. Maybe someone has drilled out the correct pilot jets and installed these afterwards.

    Does it run ok?

    • #7283

      John Allaway

      Yes, the jets are fitted as you describe – which is as they were / are on 2 stroke carbs. It does seem odd.  I have never had this bike running (it came as a non-runner due to the wiring having been fried).  I’m reluctant to go to all the trouble of fitting them only to find that the engine doesn’t run well. But I;m also reluctant to fork out several hundred quid for new carbs when it may not be necessary!


      I’ve been told by a couple of people on the Britbike forum that this could be a useful modification carried out by someone who knows what they’re doing. Richard Darby’s name has been mentioned as someone who carries out this mod. I;m sure he’s far too busy to be bothered by me phoning him just to ask though – so I’m hoping someone on the forum might know if this could be true (and what the advantage is)?

      • #7284
        David Lord
        David Lord

        Possibly the original pressed in jets were badly blocked or damaged and were replaced with the screw in ones as a repair?  I’d try them out before spending money on new carbs.

      • #7285

        John Allaway

        My carb numbers are (starting from drive side):-

        A626 L77;  A626 R76 & A262 R76

        Are these carb numbers correct for a 1975 T160 (engine number in original post)?

      • #7289
        David Lord
        David Lord

        yes, those are the correct Amal part numbers for a T160

You must be logged in to reply to this topic.